Slider
Zoom
Pan
Tilt
The Main Functions Of EIMAGE App
Please pay attention to the following notes before formal operation:
1. Before power on, please make sure to adjust the camera in good balance in every directions.
2. If the camera need to be rotated in tilt direction,please make sure the lens will not against the
bottom base tube.
3. Please make sure your battery is with enough power before using.
4. Please make sure all cables are connected correctly.
5. Open the bluetooth of mobile device,run software "E-IMAGE APP",switch on the power of MAGIC
PTZ.
6. Connect the APP with your MAGIC PTZ.
Note: During first using, first, please pair up “Magic PTZ “with your bluetooth options.
APP will ask to open the bluetooth of mobile device automatically when it is enabled,please
click “YES”.
1
.
In the define interface, please select “Pan/Tilt/Zoom”
channel separately, to control the movement of PTZ .
Note 1: if you want to do trace records, please use the CONTROLLER (optional) to do it.
1
2
3
4
5
2
.
Touch joystick
to control the camera move to your
request beginning point hen click the
” “
the color of
" "
will change color from black to
red.
,
,t
Begin A
Begin A
3
.
Touch the
joystick
again
,
to
control
the
camera move
to
your
request
ending
point
hen click the
" ",
the
color
of
" "
will
change
color
from
black
to
red
.
AB
trace
is
finished
.
, t
Set
B
Set
B
Interval Rate: used to set the interval between exposure and movement
Track: Previous set trace from A to B
The motor stop
- waiting for the exposure
- wait for Y seconds
Time- lapse working principle is as below
Begin to expose
- expose Z seconds
- End expose
After exposure
- waiting for motor running
- Wait for W seconds
One unit cyclic: take an example
of shooting 1 picture
Motor move 1
unit distance
Interval Rate
Joystick stop time
2.4G Channel
2016 EIMAGE ALL RIGHTS RESERVED
19
20
2016 EIMAGE ALL RIGHTS RESERVED
