E.H. Wachs 06-150-510-MAN, Руководство пользователя

Страница: 23 / 60

Chapter 5 , Operating Instructions: Machine Set-Up
E.H. Wachs Company Part No. 06-150-510-MAN, Rev. 0-0607 19
WARNING:
The saw may slide
or shift abruptly
when it is lifted.
Proceed slowly and reposi-
tion the lift if necessary to
keep it over the saw’s center
of gravity.
3.
Lift the saw carefully, positioning the lift so that it is
over the center of gravity as you pick it up. If you are
lifting from the top of the saw and the other end starts
to slide, stop and reposition the lift.
4.
Move the saw into position on the pipe so that the V
saddle is against the pipe at the cut position. The saw
should be close to square with the pipe; the clamping
mechanism will precisely square it.
Figure 5-4. Position the saw so that both touch points
of the V saddle are against the pipe. (The photo shows
the touch point on one side.)
Connecting the Hoses
1.
Wipe all hose couplers with a clean, lint free cloth
before making connections.
2.
Connect the hoses from the hydraulic power unit
(HPU) to the HPU fittings on the back of the topside
control unit (TCU).