E.H. Wachs 06-150-510-MAN, Руководство пользователя

Страница: 28 / 60

Guillotine Super D Pipe Saw User’s Manual
24 Part No. 06-150-510-MAN, Rev. 0-0607 E.H. Wachs Company
6.
Close both clamping drive levers (up position) at the
same time. The valves will hold pressure on the
clamping drive to keep the saw clamped on the pipe.
Figure 5-12. When the clamping drive is fully
engaged (clamping pressure equals system pressure),
return both clamping levers to the up position.
7.
Slightly lower the crane holding the saw to allow the
clamp to hold the saw’s weight. Leave the crane
attached to the saw.
O
PERATION
CAUTION: Make
sure the pipe is
supported
securely on both
sides of the saw.
Using coolant during cutting is recommended to increase
blade life and make cutting easier.
Make sure that the pipe being cut is supported securely on
both sides of the saw.
WARNING:
Make sure all per-
sonnel and loose
objects are clear of
the machine during cutting.
1.
Make sure the cutting drive speed control lever is set
to 0.