23
E-flite Ultimate 20-300 Assembly Manual
Hint
: Use a piece of string or some tape to secure the
two plugs together so that they cannot pull apart inside
the fuselage.
4. Position the servo in the opening. Use a pin drill and
1/16-inch (1.5mm) drill bit to drill the holes for the servo
mounting screws. Apply 2–3 drops of thin CA into each
hole to harden the surrounding wood. This will keep the
screws secure in the holes. Install the servo using the
screws provided with the servo.
5. Install the servo arm perpendicular to the servo.
6. Slide a clevis retainer onto the clevis of a 4-inch
(98mm) control linkage. Slide the link through the
connector and then attach the clevis to the outer hole of
the control horn.
