E-FLITE thunderbolt p-47, Инструкция по сборке

Страница: 40 / 48


2. Turn the model over and place your fingertips in
the recess in the wing. The model will rest level
when balanced. Move the battery forward or
backward in the fuse to achieve balance. If the
battery is at its limits, use the supplied clay to
weight either the nose or tail to achieve balance.

3. The optional bomb pylons can be attached to
the bottom of the wing using the supplied
5mm x 70mm two-sided tape pieces. The
bombs can be removed from the pylons by
pulling them forward.
Note : Only install the bombs and pylons if
the landing gear has been installed. Without
the gear, the bombs and pylons can easily be
damaged when landing on rough surfaces.
40