3. Attach the Y-Harness to both servos. Route the
single lead of the Y-Harness through the hole in
the center of the wing.
Hint
: Use tape to secure the servo leads to the
Y-Harness so they won’t accidentally unplug.
Note
: If using a radio with the appropriate
mixing capability, two 12" servo extensions
can be used instead of the Y-Harness for the
aileron servos.
Note
: The landing gear is optional and can be
left off when flying from rough surfaces or tall
grass that could damage the gear. Skip to
Step 6 if the landing gear will not be installed.
4. Attach the main landing gear using four landing
gear mounting screws (2mm x 6mm).
11
Содержание thunderbolt p-47
Страница 1: ...P 47 Thunderbolt Assembly Manual...
Страница 18: ...7 Glue the joiner wire and hinges using foam safe CA 18...
Страница 44: ...Notes Notes 44...
Страница 45: ...Notes Notes 45...