24
E-flite Hawker Sea Fury 400 ARF Assembly Manual
Tail Gear Installation - Fixed Rudder
Required Parts
Tail wheel collar w/setscrew
Tail wheel
Wheel spacer
Wheel axle cap
Fixed tail gear wire
Required Tools and Adhesives
Hex wrench: 1.5mm
Foam-safe CA
Note
: If you will be installing the operational rudder, skip
to the next section of the manual.
1. Slide the tail wheel collar onto the tail wheel bearing.
Align the setscrew with the notch in the bearing.
2. Slide the fixed gear tail wire into the bearing, then use
a 1.5mm hex wrench to tighten the setscrew. The wire
has a flat area for the setscrew to be tightened onto.
3. Slide the wheel spacer onto the tail gear wire.