❍
9. Use two-sided tape to mount the receiver and
speed control to the sides of the fuselage.
❍
10. Route the receiver antenna outside the
fuselage. Use tape to attach the antenna to the
tail.
DO NOT
cut the antenna, as this will
greatly reduce the radio range.
Linkage Installation
Required Parts
Fuselage
Pushrod wire (2)
Micro pushrod keeper (2)
Control horn (2)
Control horn backplate (2)
Required Tools and Adhesives
Medium CA
Small pliers
❍
1. Remove the covering in the elevator and
rudder for the control horns.
18