3
EN
To register your product online, go to www.e-fliterc.com
Table of Contents
Introduction
Additional Safety Precautions and Warnings ..2
Battery Warnings ........................................4
Charging the Battery ...................................5
Transmitter and Receiver Binding .................6
Before Flight ...............................................6
First Flight Preparation ................................6
Control Direction Test ..................................7
Control Centering ........................................7
Settings for Control Horns ............................7
Adjusting Center of Gravity (CG) ...................7
Dual Rates and Expo ...................................8
Flying Tips and Repairs ................................8
Maintenance After Flying .............................8
Installation of Side Force Generator (SFG) .....9
Service of Power Components .....................9
Replacement Parts ....................................10
Optional Parts ...........................................10
Troubleshooting Guide ...............................11
Warranty and Repair Policy ........................12
Contact Information ...................................13
Declaration of Conformity ..........................13
Designed for 3D aerobatics even in relatively small indoor spaces, the UMX Extra 300 3D utilizes
micro light film over laser cut foam with carbon reinforcement to create an ultra lightweight aerobatic
performer. Designed by ETOC Champion Seth Arnold, the UMX Extra 300 3D has been totally optimized
to deliver extreme 3D performance for any experienced pilot. Charge the flight battery, dial in the proper
setup to your transmitter, bind to the model and fly all-out 3D almost anywhere.
UMX Extra 300 3D Specifications
Wingspan
16.8 in (427mm)
Length
19.4 in (494mm)
Weight
0.98 oz (28 g)
without battery
1.2 oz (32.5 g)
with battery
Modellbau Lindinger GmbH e-Mail: [email protected] www.lindinger.at
Modellbau Lindinger GmbH e-Mail: [email protected] www.lindinger.at
