background image

EN

Declaration of Conformity

 (in accordance with ISO/IEC 17050-1)
   
No. HH2011093002

Product(s): 

  Carbon-Z 

Scimitar 

BNF 

Item Number(s): 

 

EFL10180

Equipment class: 

 

1

The object of declaration described above is in conformity with the require-
ments of the specifi cations listed below, following the provisions of the 
European R&TTE directive 1999/5/EC and EMC Directive 2004/108/EC:

EN 301 489-1 V1.7.1: 2006
EN 301 489-17 V1.3.2: 2008    

EN55022: 2010
EN55024: 2010

Signed for and on behalf of: 
Horizon Hobby, Inc.
Champaign, IL USA
Sep. 30, 2011

Steven A. Hall

Vice President

International Operations and 

Risk Management

Horizon Hobby, Inc.

Instructions for disposal of WEEE by users in the European Union

This product must not be disposed of with other waste. Instead, it is the user’s responsibility to dispose of their waste equipment by handing it over 
to a designated collections point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste 
equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and 
the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city offi ce, your 
household waste disposal service or where you purchased the product.

Country of Purchase

Horizon Hobby 

Address

Phone Number/Email Address

Horizon Service Center
(Electronics and engines)

4105 Fieldstone Rd
Champaign, Illinois
61822 USA

877-504-0233
Online Repair Request:
visit www.horizonhobby.com/service

Horizon Product Support
(All other products)

4105 Fieldstone Rd
Champaign, Illinois
61822 USA

877-504-0233
[email protected]

United Kingdom

Horizon Hobby Limited

Units 1-4 Ployters Rd
Staple Tye
Harlow, Essex
CM18 7NS
United Kingdom

+44 (0) 1279 641 097
[email protected]

Germany

Horizon Technischer Service

Hamburger Str. 10
25335 Elmshorn
Germany

+49 4121 46199 66
[email protected]

France

Horizon Hobby SAS

14 Rue Gustave Eiffel
Zone d’Activité du Réveil Matin
91230 Montgeron

+33 (0) 1 60 47 44 70
[email protected]

United States of 
America

Declaration of Conformity

 (in accordance with ISO/IEC 17050-1)
   
No. HH2011093001

Product(s): 

  Carbon-Z 

Scimitar 

PNP 

Item Number(s): 

 

EFL10175

Equipment class: 

 

1

The object of declaration described above is in conformity with the require-
ments of the specifi cations listed below, following the provisions of the EMC 
Directive 2004/108/EC

EN55022: 2010
EN55024: 2010

Signed for and on behalf of: 
Horizon Hobby, Inc.
Champaign, IL USA
Sep. 30, 2011

Steven A. Hall

Vice President

International Operations and 

Risk Management

Horizon Hobby, Inc.

Contact Information

Compliance Information for the European Union

24

Содержание Carbon-Z Scimitar





























Отзывы: