E.F. Johnson Company 98xx LOW TIER, Руководство по эксплуатации

Страница: 27 / 40

CHANNEL SCAN
27
Saving Scan List
Dealer programming determines if changes made to the scan list are
saved when power is turned off. If changes are saved, no change occurs
when power is turned off; and if they are not saved, the scan list reverts to
the programmed default status.
Scan Delay and Continue Timers
When a message is received or transmitted while scanning, there is a
short delay before scanning resumes (unless scanning has been disabled
such as by taking the microphone off-hook). The delay after receiving a
call prevents another message from being received before a response can
be made. Likewise, the delay after transmitting a call ensures that you
hear a response to your call instead of another message occurring on
some other channel.
There is also a scan continue timer that can be programmed. This
timer controls the maximum time that a call is received before scanning
resumes. Times up to 60 seconds can be programmed. This prevents
scanning from being delayed for long periods by lengthy calls.
Transmitting In The Scan Mode
When the transmitter is keyed in the scan mode, programming by
your dealer determines if the transmission occurs on the last selected or
last received channel. In addition, if the selected channel changes, it
controls which channel is selected when the scan mode is exited by
pressing the SCAN switch. The three programmable configurations are as
follows:
Last Selected - Transmissions always occur on the channel that was last
selected by the CHL up/down switches. To respond to a call not on the
selected channel, one of the following methods can be used:
•
Select the channel of the call manually using the CHL up/down
switches.