E.F. Johnson Company 98xx LOW TIER Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 40

background image

GENERAL FEATURES

23

Auto Off/On Mode

Ignition Switch - The horn alert always turns off when the ignition switch
is turned on, and always turns on when the ignition switch is turned off (if
there is a turn-off delay).

Power Switch - The horn alert always reverts to the off condition when
power is turned on by the power switch.

NOTE: This automatic operation overrides any mode that may have been
selected by the AUX1/AUX2 switch (see following).

An AUX1/AUX2 switch programmed to control the horn alert can

be used to change the currently selected mode. For example, this switch
could be used to turn the horn alert on in the Auto Off/On Mode after the
ignition switch is turned on. If this switch is not available, the current
mode cannot be changed.

Option Select

The AUX1 or AUX2 switch can be programmed to control some

type of dealer-installed accessory. The decimal point indicator for the
switch indicates when the accessory is enabled.

Power Turn-Off Delay

If the transceiver is equipped with the optional accessory cable, the

vehicle ignition switch as well as the front-panel power switch can
control transceiver power. Then for transceiver power to turn on, both the
front panel power switch and the vehicle ignition switch must be on.
When the ignition switch controls power, turn-off delays of Immediate,
10, 20, 30, 40, or 50 minutes, 1, 2, 4, 8, 10, 12, or 16 hours or Forever can
be programmed. The delay can be overridden at any time by turning
power off using the front-panel power switch or turning the ignition
switch back on.

A power turn-off delay allows features such as the horn alert and call

indicator to remain active for the programmed delay time after the igni-

«
...
21
22
23
24
25
...
»

Содержание 98xx LOW TIER









































Отзывы:

Нет отзывов

Похожие инструкции для 98xx LOW TIER

Бренд: Danfoss Страницы: 12

Бренд: Garod Radio Страницы: 29

Бренд: Samsung Страницы: 10

Бренд: M-system Страницы: 2

Бренд: Arteche Страницы: 9

Бренд: M-system Страницы: 5

Бренд: Zenith Страницы: 8

Бренд: Icom Страницы: 48

Бренд: Sangean Страницы: 84

Бренд: Gewa Страницы: 36

Бренд: M-system Страницы: 3

Бренд: Zenith Страницы: 55

Бренд: Perle Страницы: 122

Бренд: Marantz Страницы: 91

Бренд: BNF Страницы: 45

Бренд: CEBEK Страницы: 3

Бренд: Portech Страницы: 8

CentreCOM AT-280

Бренд: Allied Telesis Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды