E.F. Johnson Company 98xx LOW TIER, Руководство по эксплуатации

Страница: 18 / 40

TELEPHONE CALLS
18
The telephone calling feature allows you to place and receive tele-
phone calls using your transceiver. When placing a call, the number of
the person you are calling is dialed after the radio system is accessed. The
following information describes how calls are placed and received with
an LTR channel (system) selected. If you can place and receive calls on
conventional channels, the procedure may be different. Your dealer will
provide more information if necessary.
Placing a Telephone Call
1. Turn transceiver power on and set the volume as described starting on
page 14.
2. Select the channel programmed for telephone calls.
3. Briefly press the PTT switch to obtain a dial tone. A successful access
and busy or out-of-range conditions are indicated as described in
“Placing a Standard Call” on page 16. The following additional
features are available when making telephone calls:
Busy - If the radio system is busy (busy tone sounding) and the Busy
Queuing feature is programmed on the selected channel, it is automat-
ically selected when the PTT switch is released. Refer to page 31 for
more information on busy queuing.
Out-of-Range - An out-of-range condition is indicated by an intercept
tone. If the System Search feature has been enabled by programming,
it is automatically selected when the PTT switch is released. Refer to
page 31 for more information on the system search feature.
4. When a dial tone is heard, dial the number to be called in one of the
following ways:
•
Enter it directly using the 0-9 keys on the microphone keypad. If too
much time elapses between digits, the call is terminated.
•
If you have a microphone with a memory, you can recall it from
memory if it has been stored.