SMARTNET/SMARTZONE FEATURES
25
May 2002
Part No. 002-5100-100
•
If your transceiver does not have the proper
encryption key, “KEYFAIL” is displayed and the
call must be made in the clear mode by pressing
the Clear/Secure option key (if strapped to switch-
able). Otherwise, load the correct key.
4. When the call is finished or is not answered, end it
by pressing the Private Call option key or the F1
(Exit) key.
Placing a Private Conversation II Call
Recalling From List
1. Momentarily press the Private Call option key or
select that menu parameter. The alias of the last
called mobile is displayed, and the private call mode
is indicated by
in the display.
2. If required, select another mobile by pressing the
Up/Down switch until the alias of the desired
mobile is displayed.
3. Press the PTT switch to initiate the call.
(Proceed to the bulleted list which follows Item 3 in
the next section for events that may occur next.)
Direct Entry Using DTMF Keypad
1. Press and hold the Private Call option key until a
tone sounds (approximately 1 second). The last ID
called is displayed, and the private call mode is indi-
cated by
in the display.
2. Using the 0-9 keys, dial the ID of the mobile you are
calling (all six digits). To erase the last digit, press
the F1 key, and to cancel the call, press the Private
Call Option key again.
3. Press the PTT switch to initiate the call. If the
entered number did not contain six digits,
“INVALID” is momentarily displayed, an error tone
may sound, and the call is not initiated.
If the entered number is valid, the display indicates
the alias of the ID if it matches an ID in the call list.
Otherwise, the ID you entered continues to be
displayed.
Events that may then occur are as follows:
•
The called party answers the call.
•
The called party does not answer. Press the
Private Call option key or F1 (Exit) to end the
call.
•
If the selected mobile ID is not valid, “INVALID”
is displayed and an alert tone sounds.
•
If the radio system is busy, four low tones sound
and “BUSY” is displayed. When the system is no
longer busy, the call back tone (four beeps) is
heard and the channel is automatically acquired.
Press the PTT switch to continue the call.
•
If the call is in the secure mode and the transceiver
does not have the proper encryption key,
“KEYFAIL” is displayed and the call must be
made in the clear mode by pressing the Clear/
Secure option key or selecting that menu param-
eter (if strapped to switchable). Otherwise, load
the correct key.
4. When the call is finished or if it is not answered, end
it by pressing the Private Call option key or the F1
(Exit) key.
Receiving a Private Call (All Types)
1. When a private call is received, “CALL” is
displayed and a recurring call tone sounds.
2. To answer the call, press the Private Call option key
or select that menu parameter and then press the
PTT switch and begin speaking. The unit ID of the
calling mobile is displayed. More information
follows:
•
If the PTT switch is pressed before the Private Call
option key, the call is transmitted as a group call.
•
If private calls are not permitted (the Private Call
option key or menu parameter is not
programmed), press the Call Response option key
or select that menu parameter to answer the call.
•
The call must be answered within 20 seconds or it
is automatically terminated.
