E+E Elektronik OMNIPORT 30, Руководство по эксплуатации

Страница: 32 / 40

32
5. Press the "OK" key on the cross control.

The row is deselected.
5 Opens the next screen.
6 Either specifies the period for automatic dimming of the
colour display or deactivates the function:
30 seconds, 1 minute, 5 minutes, off
7 Either specifies the period for automatic switch-off of the
colour display or deactivates the function:
10 minutes, 30 minutes, 1 hour, off
Note!
This function is deactivated during an automatic measure-
ment.
8 Switches signal tones/key tones on or off.
9 Sets the height above sea level (SL).
This value is i.a. required for the calculation of the relative
air pressure and other values.
This option can only be selected by using the cross control
below the colour display.
1. Press the "Down" key on the cross control until the
numerical value is selected.
2. Press the "OK" key on the cross control.

The first number is selected.
3. Press the "Left" or "Right" keys on the cross control to
select the number to be configured.
4. Press the "Up" or "Down" keys on the cross control to
increase or reduce the value to be configured.
5. Press the "OK" key on the cross control.

The single number is deselected.
10 Opens the next screen.
11 Determines the setting for the amount of gas or the
volumetric flow to be measured (also see chapter
"Explanation of the measured values" page 28):
DIN 1343, DIN ISO 2533, DIN 1945-1
Note!
Before using the multifunctional hand-held, make sure that
you are aware of the device's intended purpose and the
respective standard in effect as well as the contents of this
standard.
settings 2/3:
settings 3/3:
6
7
8
9
11
10