E+E Elektronik OMNIPORT 30, Руководство по эксплуатации

Страница: 31 / 40

31
5.24 "settings" screen
You can configure the device as follows in the "Settings"
screen:
1 Selects the screen language (see chapter "Set language").
2 Selects the unit system:
Metric: Activates the metric unit system for all available
measured values (e.g. for use in
continental Europe).
Imperial: Activates the imperial unit system for all
available measured values (e.g. for use in
the USA).
3 Sets the screen brightness. This option can only be selec-
ted by using the cross control below the colour display.
1. Press the "Down" key on the cross control until the
scale is selected.
2. Press the "Left" or "Right" keys on the cross control to
reduce (left) or increase (right) the screen brightness.
4 Sets the date and time.
This option can only be selected by using the cross control
below the colour display.
1. Press the "Down" key on the cross control until the
date is selected.
2. Press the "OK" key on the cross control.

The entire row is selected
3. Press the "Left" or "Right" keys on the cross control to
select the value to be configured.
4. Press the "Up" or "Down" keys on the cross control to
increase or reduce the value to be configured.
7 Charts (top of fig. C.) and tabulates (bottom of fig. C.) the
measured values.
You can select one of the three different measurement
channels using the "Up" and "Down" keys on the cross
control until. The selected measurement channel will be
highlighted in the table.
Displayed in the table are the minimum value (MIN), the
maximum value (MAX), the arithmetic average (Ø) and
the standard deviation (SD).
In case the data won't fit onto one table page after a
longer recording session, you can browse through the
timeline ([s], on the right in fig. C.) by using the "Left"
and "Right" keys on the cross control unit.
8 Closes the selected archive entry and returns to fig. A.
Archive, fig. C.:
settings 1/3:
1
2
3
4
8
5
7