19
Operating instructions for EE310 Humidity / Temperature Transmitter
4.4 Pluggable probe (option PC4)
EE310-
T5
and EE310-
T10
transmitters are optionally available with pluggable sensing probe,
which is attached to the EE310 enclosure by a push-pull plug.
If the probe or the probe cable gets damaged it is possible to easily replace the probe without
humidity and temperature adjustment. The replacement probe (see order information below) is
supplied with a set of 7 individual parameters.
1.
2.
Fig. 20
Pluggable probe
Probe replacement procedure
•
Plug off the damaged probe
•
Plug on the new probe
• Update the 7 parameters with EE-PCS Product Configuration Software or via display and push
buttons.
Working pressure
Probe replacement
Parameters
Humidity
coefficient
Resistance R0
Capacity C76
Capacity gain
Capacity offset
Temperature
coefficient TK
Resistance Offset
Menu
Device
settings
Note:
When replacing the probe, the factory calibration loses its validity.
A calibration to verify accuracy is recommended but not mandatory.
Order information for replacement probe
PE310
Type
T5
T10
Filter
stainless steel sintered
F4
F4
PTFE
F5
H
2
O
2
F12
stainless steel - metal grid (up to 180 °C / 356 °F)
F9
F9
Cable length
(incl. probe length)
2 m (6.6 ft)
K2
K2
5 m (16.4 ft)
K5
K5
10 m (32.8 ft)
K10
K10
Probe length
65 mm (2.55“)
L65
200 mm (7.87“)
L200
L200
400 mm (15.75“)
L400
L400
Process connection
1/2“ ISO thread
PA23
1/2“ NPT thread
PA25
Optional features
E+E sensor coating
C1
C1
Tab. 1
Ordering code for replacement probe
