16
Operating instructions for EE310 Humidity / Temperature Transmitter
Switching point
% / RH
Standard
Inverted
Power
Hysteresis
Terminal 2-3
Terminal 5-6
t
closed
open
closed
open
ON
OFF
Fig. 17
Example of alarm in case of power supply failure using inverted alarm outputs.
The measurands at the outputs as well as switching points, hysteresis and the default state
(standard / inverted) can be set via EE-PCS Product Configuration Software or using the display
and the push buttons.
Menu
Alarm number
Alarm output*
Alarm 2
Alarm 1
Mode
Switch hysteresis
Measurand
Switching point
Switching point
Hysteresis
Standard
Inverted
Normal state
Switch window
Measurand
Switching point
low
Switching point
Hysteresis
Switching point
high
Switching point
Hysteresis
Standard
Inverted
Normal state
Error indication
Standard
Inverted
Normal state
OFF
Temperature [°C]
Temperature [°F]
Temperature [K]
Rel. humidity [%]
Vap. p. pressure [mbar]
Vap. p. pressure [psi]
Dew point [°C]
Dew point [°F]
Wet bulb temp. [°C]
Wet bulb temp. [°F]
Abs. humidity [g/m³]
Abs. humidity [gr/ft³]
Mixing ratio [g/kg]
Mixing ratio [gr/lb]
Enthalpy [kJ/kg]
Enthalpy [ft lbf/lb]
Enthalpy [BTU/lb]
Frost point [°C]
Frost point [°F]
Water activity [aw]
Saturation [%]
Water content [ppm]
Wet bulb temp. [K]
Dew point [K]
Frost point [K]
Volume concentr. [ppm]
* Menu only available with connected alarm module during EE310 start-up
