5
User Manual EE074 Temperature Probe with Modbus RTU
1.2 Environmental Aspects
Products from E+E Elektronik® are developed and manufactured observing of all relevant requirements
with respect to environment protection. Please observe local regulations for the device disposal.
For disposal, the individual components of the device must be separated according to local recycling
regulations. The electronics shall be disposed of correctly as electronics waste.
2 Scope of Supply
• EE074 – Modbus RTU Temperature Probe
• Test report according to DIN EN 10204-3.1
• Quick user guide
3 Product Description
3.1 Dimensions
The following figure shows the probe dimensions in mm (inch)
82
(3.23)
L
*)
Ø
12
(0.47)
Ø
6
(0.24)
L in mm
L in Inch
70
2.81
155
6.16
305
12.07
*)
3.2 Connectivity
4 Installation
4.1 Wall and Ceiling Mount
Best measurement performance is achieved when the entire probe
is located inside the environment to be monitored.
In such a case, the EE074 may be for instance fixed onto a wall with
the mounting clip HA010211 (not included in the scope of supply, see
data sheet “Accessories”), or freely hang from the ceiling on the
connection cable.
Pin number Function
Wire colors for accessories:
- Coupling flange HA010705
- Connection cable HA010819/820/821
1
Supply voltage
brown
2
B RS485 (D-)
white
3
GND
blue
4
A RS485 (D+)
black
5
Not connected
gray
mA
2
4
5
1
3
V
+
-
Voltage output
Current output
GND analogue output
Power supply 10 - 35 V DC*
GND
front view
1
2
3
4
5
*The supply circuit must be fused with
≤
8A
front view
M12 male connector
