© Copyright e-con Systems. 2020. All rights reserved.
e-CAM50_CU96 adaptor board has two 20-pin Samtec connectors (CN1 and CN3) for
mating with e-CAM50_CU96 module board and a 30-pin I-PEX connector (CN2) for
connecting with e-CAM50_CU96 base board. Both the module board and adapter
board are screwed into a single unit. This single unit should not be separated. This
adaptor board acts as a bridge between the camera module and the base board. e-
CAM50_CU96 is connected to ROCK960 development board with low and high-
speed interface connectors.