8
e-CAM50_CU96 Getting Started Manual
e
-
CAM50_CU96 Board Handling
Procedure
This section describes the handling procedure of e-CAM50_CU96 board.
The procedure to assemble camera board are as follows:
1.
Connect CN4 and CN5 connectors of e-CAM50_CU96 base board with high
speed and low speed camera interface connectors in the ROCK960 development
board.
The CN4 and CN5 connectors location in the e-CAM50_CU96 base board is
shown in below figure.
Figure 6: Camera Connector location in e-CAM50_CU96 Base Board
The high speed and low speed camera interface connectors in the ROCK960
development board is shown in below figure.
Figure 7: Camera Connectors location in ROCK960 Development Board
