E.C.A. PHOENIX PH HM 11, Руководство пользователя и инструкция по установке, Страница: 8 / 20

7
INSTALLATION AND CONNECTIONS
Selecting the Suitable Place for Installation
The appliance must be installed in accordance with gas safety regulations and relevant standards.
Additionally, the clearances around the boiler should be as shown in fig. 4 in order to make service,
maintenance and usage easier.
a) b)
Figure 4
- iIndication minumum clearances from the ceiling and the sides.
The appliance should be mounted against a closed wall. The outer surface of the water heater do not exceed
85°C in maximum running mode so do not take additional precautions againts constructional materials
(combustible materials)
Danger:
Do not block the air vents which provide fresh air to the installation room
Danger:
The water heater location and air/flue terminal position must obey national
and local requirements, gas safety regulations and relevant standarts.
The water heater is not suitable for external installation. It should be within in the building.
 In case of gas leakage, it is necessary to vent the installation room according to national and local
requirements, although the water heaters are independent of room volume and ventilation.

The air/flue terminal must be exposed to the external air and allow free passage of air cross it at all times.
 The minimum acceptable dimensions from the terminal to obstructions and ventilation openings must obey
national and local requirements.
 The air/flue ducts should be fitted at a slight 2
⁰
or 3
⁰
downwards incline to prevent any water or
condensation from entering the combustion chamber.