E.C.A. PHOENIX PH HM 11, Руководство пользователя и инструкция по установке, Страница: 5 / 20

4
OPERATION AND MAINTENANCE
• Please be wary of the warnings in the installation and user manual. That way, any danger caused by false
operation could be prevented.
• For the longevity and high performance of your appliance, maintenance once a year is advised. Maintenance
is under the scope of appliance’s warranty and must be done by the authorized technical services.
• Outer surfaces of the appliance must be cleaned with a damp cloth without using any chemical substances.
Usage of chemicals like detergents etc. could cause rust and scratches.
Danger:
Any person who is not capable in physical, sensory or emoitonal aspect
(including children) shall not operate the appliance without observation.
Danger:
This appliance is not suitable for use by the people who is not capable in
physical, sensory or emotional aspects without observation and information of the
people responsible for the appliance. Children should not tamper with the device.
Any unauthorized usage that does not fit the purpose of the device could cause
danger to the people and the environment.
PRODUCT
General Specifications
This is a room sealed fan assisted gas water heater with electronic direct ignition and ionisation safety. The
water heater supplied for use with Natural Gas. The water heater has space saving design which provides easy
servicing and maintenance. It has also a elegant appearance with compact dimensions (6 54 x3 52 x2 68 mm).
Microcontroller board provides all the functionality and safety of the water heater.
Burner, is made of stainless steel, withstands thermal stress. Burner performs silently and provides efficient
and clean combustion as a result of the homogeneous dispersion of gas. Heat exchanger is made of copper and
designed for thermal shock absorbing. It has long life, high productivity and is non-calcerous as well.
Functions and the safety of the appliance is provided by the control mainboard. Mainboard controls the gas
valve, burner and flow sensor. Flame in the burner is always checked via ionization electrode and can be
observed by the flame symbol om the screen.
Thanks to the single button, ease of use and ergonomically control of mainboard is provided for the end users.
With a backlighted wide black LCD screen shows information about working situation, set points of water
temperature, real time water temperature, fault codes and service parameters.
Safety measurements on the appliance assures both your safety and the safety of the appliance. These safety
measurements are as follows;
• Flue Gas Safety (Bad combustion prevention)
• Flame Loss Safety (Flame availability check with ionisation electrode)
• Overheating Water Temperature Safety (85 °C)
• NTC Overheating Safety (71 °C)
• Low Voltage Safety (170 VAC)
• Fan Rpm Control via Hall Effect Sensor Signals.
• Prevention of Dry Combustion Thanks to the Flow Sensor. (Combustion is not allowed belove 2,5lt/min
water flowrate)
• Frost Protection (5°C Electrical supply to the boiler must be maintened in order to frost protection to work)
• Overload Working Safety (system off, factory setting is 6 hours continious operation)