toward the front out of the holder 4.
Remove the on-board computer when you park
the eBike.
It is possible to secure the on-board computer
against removal in the holder. To do so, remove
the holder 4 from the handlebar.
Put the on-board computer in the holder. Screw
the locking screw 15 (thread M3, 8 mm long)
from below into the thread provided in the
holder. Mount the holder back onto the
handlebar.
Operation
Initial Operation
Requirements
The eBike system can only be activated when
the following requirements are met:
– A sufficiently charged battery pack is
inserted
– The on-board computer is properly inserted
in the holder (see “Inserting and removing the
on-board computer”).
– The speed sensor is connected properly (see
drive unit operating instructions).
Switching the eBike System On/Off
Options for switching on the eBike system:
– If the on-board computer is already switched
on when you insert it into the holder, then the
eBike system will be switched on
automatically.
– When the on-board computer and the eBike
battery pack are inserted, briefly press the
On/Off button 5 of the onboard computer.
– When the on-board computer is inserted,
press the On/Off button of the eBike battery
pack (see battery pack operating instructions).
The drive is activated as soon as you step on
the pedals (except for in the push assistance
function or in assistance level “OFF”). The
motor output depends on the settings of the
assistance level on the on-board computer. As
soon as the system is activated, “Active
Line/Performance Line” will appear briefly on
As soon as you stop pedaling when in normal
operation, or as soon as you have reached a
speed of 25/45 km/h, the assistance from the
eBike drive is switched off. The drive is
automatically re-activated as soon you start
pedaling again and the speed is below 25/45
km/h.
Options for switching off the eBike system:
– Press the On/Off button 5 of the on-board
computer.
– Switch the eBike battery pack off by its
On/Off button (see battery pack operating
instructions).
– Remove the on-board computer out of its
holder. If the eBike is not moved and no button
is pressed on the onboard computer for 10
minutes, the eBike system will shut down
automatically in order to save energy.
Displays and configurations of the on-
board computer
Energy supply of the on-board computer
If the on-board computer is in the holder 4, a
sufficiently charged battery pack is inserted in
the eBike and the eBike system is turned on,
then the on-board computer is powered by the
battery pack of the eBike.
If the on-board computer is removed from the
holder 4, the energy is supplied via an internal
battery pack. If the internal battery pack is
weak when the on-board computer is switched
on, “Attach to bike” will appear in text indication
d for 3 s.
The on-board computer will then turn off again.
To charge the internal battery pack, put the on-
board computer back in the holder 4 (when a
battery pack is inserted in the eBike). Switch
the eBike battery pack on by its On/Off button
(see battery pack operating instructions).
You can also charge the on-board computer via
the USB port.
Open the protective cap 8. Connect the USB
F O R M E B I K E S . C O . U K
19
