.
BUXTON FOLDER
FOLDING INSTRUCTIONS
1. Fold the pedals.
Release the locking mechanisms by pushing
the platform of each pedal in towards the crank
then turn it down so that it is vertical.
2. Lower the saddle
a) Release the quick release seat clamp by
pulling the lever open.
b) Push the saddle down
3. Fold the kickstand.
Release the spring lock and push the hinged
kickstand backwards and upwards as far as
it will go.
4. Fold the frame.
Release the spring lock (a) and pull the lever
out and away from the frame. Now fold the
frame in half until the frame magnet located
on the front fork connects to the plate on the
kickstand at the rear.
5. Fold the handlebar stem.
Release the locking mechanism by rotating the
lever anti-clockwise. Allow the stem to fold down
in a controlled manner over the top tube of the frame.
WARNING
Proper adjustment and securing of all locking mechanisms is critical to rider safety. If adjusted
too tightly or too loosely, injury to the rider or permanent damage to the hinges may result. Make
sure you check all latches and quick releases before every ride.
F O R M E B I K E S . C O . U K
25
