Dynon Avionics FlightDEK-D180 Скачать руководство пользователя страница 85

 

8.

 

AUTOPILOT INSTALLATION AND CONFIGURATION 

Dynon Avionics’ Autopilot (AP) system is a competitively priced product for the Experimental 
& Light Sport Aircraft (LSA) aircraft market. Unlike standalone AP systems, Dynon’s AP is an 
enhancement to the Dynon Avionics EFIS-D10A, EFIS-D100, and FlightDEK-D180 products 
(beginning with firmware version 5.0). The Dynon Avionics AP provides roll (aileron) and/or 
pitch (elevator) control, leveraging the proven sensors, algorithms, and display systems of 
Dynon’s modern EFIS products. Another innovative element of the Dynon Avionics AP is that 
the servomotors (servos) responsible for actuating the control surfaces are “smart” devices. 
Dynon’s servos not only accept commands from the AP but also report “health,” resistance to 
commanded movements, motor override (or “slip”), and many other data elements back to the 
EFIS. This level of communication between AP control and motors provides the pilot with an 
unprecedented degree of awareness of the overall performance of the AP. Dynon currently offers 
the following servo models: 

Model Number 

Torque 

Attachment 

SV32 Standard 

Arm 

SV32L Long 

Arm 

SV32C 

36 inch-pounds 

Capstan 

SV42 Standard 

Arm 

SV42L

* Long 

Arm 

SV42C 

55 inch-pounds 

Capstan 

* SV42L servo is a special order item – contact Dynon Technical Support for details. 

 

Dynon also offers the AP74 Autopilot Interface Module, which provides dedicated AP 
control via panel-mounted buttons and a knob. Dynon offers mounting kits for specific 
airframes, which include parts and detailed instructions. Additionally, Dynon Avionics 
supplies a generic mounting kit of basic parts that provides a head start for owners of aircraft 
not currently supported by our specific kits. 

Additional Information and Updates 

This guide provides generic mechanical installation guidelines to assist installers while 
integrating the Autopilot system into many aircraft. If you purchased a plane-specific kit from 
Dynon Avionics, it contains more detailed drawings and diagrams unique to your aircraft. You 
can find the list of Dynon’s aircraft mounting kits on the current 

Price List / Order Form

 on  

Dynon’s secure web site at 

store.dynonavionics.com

. The drawings and installation instructions 

of current Dynon Avionics aircraft mounting kits are available on the Dynon web site at 

docs.dynonavionics.com

Because the Dynon Avionics Autopilot is a new product and we expect that it will be installed in 
a wide variety of aircraft, Dynon’s Internet sites provide up-to-date information on installation 
and operation issues: 

wiki.dynonavionics.com

 – Dynon’s Documentation Wiki provides enhanced, extended, 

continuously-updated online documentation contributed by Dynon employees and customers. 

FlightDEK-D180 Installation Guide 

8-1 

Содержание FlightDEK-D180



























































































































































Отзывы: