8
Locate the black and the white 6 pin
connectors under the fuel tank.
9
Unplug these connectors.
10
Plug the connectors from PCIII in
line of the stock connectors. Plug in
the black connectors from the PCIII
to the black connectors of the stock
wiring harness. Repeat for the white
connectors.
11
Install the PCIII in the tail section
using the supplied velcro.
Note: make sure to clean both surfaces
with the alcohol swab before
attaching the unit.
12
Check all connections. Check to
make sure that the wiring harness
will not get pinched.
13
Bolt down fuel tank.
14
Reinstall the passenger seat and
main seat.
Fig. D
Fig. E
Fig F
2005 Yamaha YZF 600 R6 - PCIII USB -
3
i415-411
www.powercommander.com
Stock connectors
PCIII connectors
Stock connectors
