2009 Yamaha FZ1 PCV -
3
22-015 www.powercommander.com
FIG.A
FIG.C
FIG.B
1
Remove the main seat and the passenger seat.
2
Prop the front of the fuel in the up position.
3
Lay the PCV in the tail section temporarily. Route the PCV harness
under the tail section and go towards the front of the bike.
4
Locate the connector from the main wiring harness to the injector rail
and uplug this connector (Fig. A).
NOTE: This connector is grey in color.
5
Plug the connectors from the PCV in-line of the stock wiring harness
(Fig. B).
6
Remove the bolt on the left hand side of thefuel tank bracket and
loosen the right hand bolt enough to route the PCV harness under-
neath it (Fig. C).
7
Re-tighten the bracket.
PCV harness
Bracket