Dyness PowerDepot H5B, Руководство пользователя

Страница: 27 / 33

PowerDepot H5B series User Manual
21
c. Set the DIP switch to the correct state
Master Setting 1 Master Setting 2 Master Setting 3 Master Setting 4 Slave Setting
d. Re-install the cover with four screws which were removed in step a.
Note:

Confirm the positive and negative interface of battery output terminal and inverter
input terminal. The red power cable is for connection of the battery’s positive to
inverter ’ s positive, and the black power cable is for the connection of battery ’ s
negative to inverter ’ s negative.Before connection, it is necessary to confirm the
charge and discharge parameters of the inverter interface.
Voltage and current should meet the requirements of Table 2-2 battery
performance parameters.

When you use battery in parallel, it doesn’t need to change the DIP switch of the
host module in the master PowerDepot H5B which communicates with the inverter
directly.

How to judge that the communication between PowerDepot H5B and PowerDepot
H5B is normal:
1. 1. If there is communication between the inverter and battery system, it can be
judged by the maximum charge and discharge current value on the inverter
sent by the battery.
(The maximum charge and discharge current value displed on the inverter)
( The maximum charge and discharge current value of one battery module )
=
number of modules
1234