Dynaset HKL 1300, Руководство пользователя

Страница: 7 / 74

7
Dynaset Oy | Menotie 3, 33470 Ylöjärvi | puh. 03 3488 200 | info@dynaset.com | www.dynaset.com
HYDRAULIC ROTARY VANE COMPRESSORS
GENERAL
1. GENERAL
This manual contains general information about assembly, installation, operation
and maintenance of the DYNASET HKL hydraulic rotary vane compressor.
ATTENTION!
Read this user manual before installation, use or maintenance of the HKL
compressor to ensure proper handling, operation and maintenance right
from the beginning. Pay attention to warnings and safety instructions.
READ CHAPTER “2. SAFETY” for more information.
1.1. PRODUCT INFORMATION
HKL compressors are compact and integrated all-in-one units, especially designed
for mobile installation. The only power source is a hydraulic system to provide
compressor with required hydraulic fluid flow at demanded pressure.
HKL compressor converts the hydraulic power into high quality compressed air
and it can be installed in almost any working machine. HKL compressors are used
to power for example pneumatic tools, filling tires, air flushing, purge air protection
equipments, cleaning equipments and CAFS foam generation.
HKL compressors are designed to meet regular modern compressed air demands.
1.2. PRODUCT IDENTIFICATION KEY
The product identification key describes the characteristics of the DYNASET
product. The product identification key is on the product type plate which is
attached onto every DYNASET product.
Picture 1: Identification key for HKL
1. Product Goup HKL Hydraulic Rotary Vane Compressors.
2. Maximum Discharge. It is the maximum amout of air flow (l/min) that HKL
hydraulic compressor can produce at discharge pressure of 6 bar (according to
ISO1217(1996).)
3. Maximum Discharge Pressure. It is the maximum air pressure (bar) that HKL
hydraulic compressor can produce.
4. MAXIMUM hydraulic flow. It is the maximum hydraulic flow that HKL hydraulic
compressor is designed to run with. Do not exceed the maximum hydraulic
flow.