Dynaset HKL 1300, Руководство пользователя

Страница: 53 / 74

53
Dynaset Oy | Menotie 3, 33470 Ylöjärvi | puh. 03 3488 200 | info@dynaset.com | www.dynaset.com
HYDRAULIC ROTARY VANE COMPRESSORS
MAINTENANCE
1. Loosen the pierced screws (1), which secure the fittings of the flexible oil return
tubes (2).
2. Unscrew and remove the oil return valves (3). Wash the valves with detergent
and then dry with compressed air, if there is a lot of crust on the sintered filter,
replace it.
3. Assemble oil return valves in opposite order. Remember always to replace the
O-ring (4).
NOTE!
Be careful with the tightening of the two pierced screws, as they break
easily.
6.9. AIR-OIL SEPARATING ELEMENT REPLACEMENT
ATTENTION!
Dispose of the old separating element in accordance with the applicable
regulations.
Heavily soiled intake air or low-quality oil cause heavier soiling of the separting
element, which can result in the premature need for replacement.