Dynapos DCI020-M, Техническое руководство

Страница: 4 / 21

2.2 UV sensitivity adjustment
--There are 10 level of UV sensitivity for selection, Hold press ”SET/-10” button for 3-5 seconds,
the counting display window shows “OP-A”, batch display window shows one digit of the
number”OFF,01,02….10”, press the button “MOOD” to select ‘UV’ sensitivity as you want, After
select the right value, press” RESET” to keep the data.
--The bigger number means the higher sensitivity you set and “OFF” means deactivate this
detection function.
2.3 MG sensitivity adjustment
- - There are 3 level of UV sensitivity for selection, Hold press ”SET/-10” button for 3-5 seconds,
the counting display window shows “OP-B”, batch display window shows one digit of the
number”OFF,01,02,03”, press the button “MOOD” to select ‘MG’ sensitivity as you want, After
select the right value, press” RESET” to keep the data.
--The bigger number means the higher sensitivity you set and “OFF” means deactivate this
detection function.
2.4 Size detect function ON/OFF
- - There are 3 level of UV sensitivity for selection, Hold press ”SET/-10” button for 3-5 seconds,
the counting display window shows “OP-B”, batch display window shows one digit of the
number”OFF,01,02,03”, press the button “MOOD” to select ‘MG’ sensitivity as you want, After
select the right value, press” RESET” to keep the data.
--The bigger number means the higher sensitivity you set and “OFF” means deactivate this
detection function.