Dynapos DCI020-M, Техническое руководство

Страница: 3 / 21

It is the heart core of the whole machine’s operating. The system sends out instruction of start or
begin to make the machine operate while the hopper sensor working.
1.6 small motor
It used as transmitting device, The system
sends out instruction of start or begin to
make the machine running while the hopper
sensor working. It will take in the notes which
pass from magnetic board, then transmit to
frontal-platform.
1.7 Stacker
The stacker as well as the block board form
frontal-platform. All the passing notes
gather here so that it’s convenient to tidy away.
2. INNER SETTING PROGRAM
2. 1 Automatic & Manual counting.
Press the “SET/-1” button for 3~5 seconds to enter program setting, it will appear “OP-A” ,
press “FUNC” to change the item to be “OP-E”, then press ‘MOOD” to choose ‘YES”(automatic
counting) or “NO” ( manual counting), after choosing the level, press “RESET” to keep the
new program.
Small motor