DYNAPAR NorthStar SLIM Tach SL56, Инструкция по эксплуатации, Страница: 6 / 12

NorthStar SLIM Tach
®
SL56 Instruction Manual
1.3 Specifications
Electrical Specifications
Resolution 512, 512Z, 1024, 1024Z, 2048 PPR
Frequency Response 0 to 120KHz Max.
Pulse Code Incremental, marker, quadrature, complements
Output Channels A & B (incremental), Z (marker)
Duty Cycle 50 ± 30% (within defined mechanical specs)
Quadrature Accuracy A-B 90º ± 22º
Output Type High Speed, Differential Driver
Rise and Fall Less than 500 ns @ 10,000 pf (typical)
Current Consumption 40 mA typical plus line driver load
ESD Protection 2 kV
Output Current Capability 150 mA typical [350 mA maximum (worst case)]
Connector 10 pin Epic style, NEMA 4, 12 industrial connector
Suggested Cable 22 AWG, 8 conductor, 18” length, 4 twisted shield pairs
Input Voltage +5.0 to +15.0 VDC
Mechanical Specifications
Maximum Operational Speed 5,000 RPM
Nominal Air Gap 0.019 ± 0.008 inch
Shaft Axial End Play Up to ± 0.045 inch maximum
Enclosure Configuration 4.5 - Inch Diameter, 56 C motor face or accessory flange to meet NEMA MG1-4
standards. Cast aluminum
Slew Rate 12,000 RPM per second
Approximate Box Weight 4lbs. (2kg)
Box Dimension 17.5” x 10.75” x 2.75”
Common Environmental Specifications
Operational Temperature -40º to + 90º C (extended -40º to +120º C, optional)
Operational Humidity Range Maximum of 98%
Chemical Resistance Salt Spray, Most Solvents, Mild Acids and Bases
Vibration Minimum 18 g’s RMS, 5-2000 Hz
Shock (Encoder Housing) 1 meter drop tested, min 30 g’s shock spectrum
Standards
*CE EN 61326
U
*NOTE
U
: Provides CE compliance in applications where cable length is less than 30 meters.
Specifications subject to change without notice
6 © DYNAPAR +1.800.873.8731