Dynapac V5100TV, Руководство по эксплуатации и техническому обслуживанию

Страница: 22 / 152

B 2
2 Assemblies
Tamper and vibration elements: The tamper knives converging in the middle area
prevent seams in the middle.
Auxiliary vibration (option) supports the compacting process, thus improving the tex-
ture.
The tamper and the vibration elements can be individually switched on and off and
controlled with regard to speed.
Continuous speed control always ensures optimum compacting results for the differ-
ent materials and layer thicknesses.
Main screed and extendable parts: The screed parts which can be hydraulically ex-
tended from the middle section ("main screed") extend the working width of the
screed at the push of a button.
A sophisticated guide system – two telescopic tubes with intermediate box per side –
ensure high stability.
The angle and the height of the extendable parts in relation to the main screed can
be quickly and easily readjusted.
A
These settings, the basic settings of the screed in relation to the paver finisher and
adjustment of the crowning are described in chapter E, "Set-up and modification".
Extension parts: With a co-ordinated system of extension parts, the operating width
can be increased in several stages.
Side shields: The side shields serve to prevent the material from overflowing to the
outside.
The following components are available as options.
- Heated side shields
- Hinged side shields
- Edge compactors
- Cut-off shoes
Walkway plates: The hinged walkway plates are attached to the bracket provided.
Only in special cases (e.g. laying close to a wall) may the walkway plates be tempo-
rarily detached.
The walkway plates are available in the following version for optimally reduced trans-
portation lengths:
- Removable / hinged version