Dynapac ICA362, Инструкция по эксплуатации

Страница: 62 / 121

Operation
ICA362-4EN3.pdf 2012-06-12
Normal braking
38
39
42
Fig. Control panel
38. Vibration On/Off switch
39. Forward/Reverse lever
42. Parking brake knob
Press the switch (38) to switch off the vibration.
Move the forward/reverse lever (39) to the neutral
position to stop the roller.
Turn the engine speed control back to idling. Allow the
engine to idle for a few minutes to cool down.
When starting and driving a machine that is cold,
remember that the hydraulic fluid is also cold and
that braking distances can be longer than normal
until the machine reaches the working temperature. When starting and driving a machine that is cold,
remember that the hydraulic fluid is also cold and
that braking distances can be longer than normal
until the machine reaches the working temperature.
Activate the parking brake knob (42) even for short
stops on sloping ground. Activate the parking brake knob (42) even for short
stops on sloping ground.
Switching off
2
1
Fig. Instrument panel
1. Starter switch
2. Panel for warning lamps
Check instruments and warning lamps to see if any
faults are indicated. Switch off all lights and other
electrical functions.
Turn the starter switch (1) to the left to the shut off
position. On rollers without a cab, lower and lock the
instrument cover.
52