Dynapac ICA362, Инструкция по эксплуатации

Страница: 43 / 121

Machine description
ICA362-4EN3.pdf 2012-06-12
No Designation Symbol Function No Designation Symbol Function
33 Warning light, engine coolant
temperature If the lamp comes on, the engine is too hot. Stop the
engine immediately and locate the fault.
Refer also to the engine manual. 33 Warning light, engine coolant
temperature If the lamp comes on, the engine is too hot. Stop the
engine immediately and locate the fault.
Refer also to the engine manual.
34 Warning lamp, low fuel level When the lamp comes on, there is only a small amount
of fuel left.
Refuel as soon as possible. 34 Warning lamp, low fuel level When the lamp comes on, there is only a small amount
of fuel left.
Refuel as soon as possible.
35 Speed selector, drum/wheels
(Optional) Position 1: Working mode 35 Speed selector, drum/wheels
(Optional) Position 1: Working mode
Position 2: Used if the drum spins. Position 2: Used if the drum spins.
Position 3: Used if the rear tires spin. Position 3: Used if the rear tires spin.
Position 4: Transport mode Position 4: Transport mode
36 Speed selector, wheels Transport speed (Low) 36 Speed selector, wheels Transport speed (Low)
Transport speed (High) Transport speed (High)
37 Emergency stop When pressed, the emergency stop is activated. The
brake is applied and the engine stops. Brace yourself
for a sudden stop. 37 Emergency stop When pressed, the emergency stop is activated. The
brake is applied and the engine stops. Brace yourself
for a sudden stop.
38 Vibration On/Off, switch Press once and release to switch the vibration on,
press again to switch the vibration off.
The above only applies when the amplitude selector 17
is in the High or Low position. 38 Vibration On/Off, switch Press once and release to switch the vibration on,
press again to switch the vibration off.
The above only applies when the amplitude selector 17
is in the High or Low position.
39 Forward/Reverse lever The lever must be in neutral to start the engine. The
engine cannot be started if the forward/reverse lever is
in any other position.
The forward/reverse lever controls both the roller's
driving direction and speed. When the lever is moved
forward, the roller moves forward.
The roller's speed is proportional to the distance the
lever is from the neutral position. The further the lever
is from the neutral position, the higher the speed. 39 Forward/Reverse lever The lever must be in neutral to start the engine. The
engine cannot be started if the forward/reverse lever is
in any other position.
The forward/reverse lever controls both the roller's
driving direction and speed. When the lever is moved
forward, the roller moves forward.
The roller's speed is proportional to the distance the
lever is from the neutral position. The further the lever
is from the neutral position, the higher the speed.
40 Horn, switch Press to sound the horn. 40 Horn, switch Press to sound the horn.
41 Antispin function (Optional) Optimized antispin function forwards is obtained with
the knob in the left position.
Optimized antispin function backwards is obtained with
the knob in the middle position.
Set the knob in the right position during transport. 41 Antispin function (Optional) Optimized antispin function forwards is obtained with
the knob in the left position.
Optimized antispin function backwards is obtained with
the knob in the middle position.
Set the knob in the right position during transport.
42 Parking brake On/Off Turn to activate the parking brake, the machine stops
with the engine running.
Always use the parking
brake when the machine is stationary on a sloping
surface.
42 Parking brake On/Off Turn to activate the parking brake, the machine stops
with the engine running.
Always use the parking
brake when the machine is stationary on a sloping
surface.
33