Dynapac ICA362 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 121

background image

Introduction

ICA362-4EN3.pdf

2012-06-12

Introduction

The machine

CA362 is one of Dynapac's medium-heavy soil
compaction rollers. It is available in a D (smooth drum)
and PD (padfoot) version.

Intended use

The D-version is intended for the compaction of
rockfill. The main area of application for the PD
version is on cohesive material and weathered stone
material.

All types of base courses and subbase courses can be
compacted deeper and the interchangeable drums, D
to PD, and vice versa, facilitate even greater variety in
the range of application.

The cab and safety-related accessories are described
in this manual. Other accessories, such as compaction
meter, tachograph and field computer, are described
in separate instructions.

Warning symbols

WARNING ! Marks a danger or a hazardous
procedure that can result in life threatening or
serious injury if the warning is ignored.

WARNING ! Marks a danger or a hazardous
procedure that can result in life threatening or
serious injury if the warning is ignored.

CAUTION ! Marks a danger or hazardous
procedure that can result in damage to the
machine or property if the warning is ignored.

CAUTION ! Marks a danger or hazardous
procedure that can result in damage to the
machine or property if the warning is ignored.

Safety information

It is recommended to at least train operators in
handling and daily maintenance of the machine
in accordance with the instruction manual.

It is recommended to at least train operators in
handling and daily maintenance of the machine
in accordance with the instruction manual.
Passengers are not allowed on the machine, and
you must sit in the seat when operating the
machine.

Passengers are not allowed on the machine, and
you must sit in the seat when operating the
machine.

The safety manual supplied with the machine
must be read by all roller operators. Always
follow the safety instructions. Do not remove
the manual from the machine.

The safety manual supplied with the machine
must be read by all roller operators. Always
follow the safety instructions. Do not remove
the manual from the machine.

1

«
...
9
10
11
12
13
...
»

Содержание ICA362


























































































































Отзывы:

Нет отзывов

Похожие инструкции для ICA362

Бренд: Campbell Страницы: 18

Бренд: Vector Страницы: 4

Бренд: DANLERS Страницы: 2

Бренд: Haas Automation Страницы: 26

Бренд: xsto Страницы: 76

Бренд: F&V Страницы: 5

Бренд: F Care Systems Страницы: 2

Бренд: ParaBody Страницы: 3

Бренд: hager Страницы: 2

Бренд: Jacto Страницы: 12

Бренд: Valmar Страницы: 78

Бренд: Valhalla Scientific Страницы: 64

Бренд: Pani Страницы: 12

Бренд: FASTER TOOLS Страницы: 19

Бренд: ubicquia Страницы: 36

Бренд: Garmin Страницы: 2

Бренд: Parker Страницы: 58

Бренд: Feniex Страницы: 5

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды