Dynapac DTR75 Скачать руководство пользователя страница 93

Страница: 93 / 120

Clean the area around the cover.

Unscrew the cover and change the oil filter element.

Clean the sealing face on the engine.

Insert the new filter oil filter element with the recess facing

downwards.

10.

Check the seal ring on the cover for damage, replace if nec-

essary.

11.

Slightly lubricate the seal ring.

12.

Screw the cover back on tightly.

13.

Fill in fresh engine oil through the filler opening.

14.

Push the dipstick in.

15.

After a short test run, check the oil level on the dipstick, top

up oil if necessary.

16.

Check oil filter and drain plug for leaks.

17.

Dispose of oil and oil filter insert in an environmentally

friendly way.

8.9.3 Replacing the fuel filter

NOTICE!
Danger of engine damage!

–

Ensure strict cleanliness! Thoroughly clean the

area around the fuel tank beforehand.

–

Never operate the engine after having removed

the fuel filter.

Protective equipment:

Working clothes

Safety shoes

Protective gloves

Park the machine safely

Chapter 6.6 „Parking the machine

in secured condition“ on page 67

Use a suitable vessel to collect running out fuel.

Changing the oil filter element

Fig. 86

Filling in engine oil

Fig. 87

Concluding work

Maintenance – Annually

DTR75

Содержание DTR75

























































































































Результаты поиска

Содержание DTR75

Отзывы:

Похожие инструкции для DTR75

Бренды по названию

Популярные бренды

Dynapac DTR75, Руководство по эксплуатации

Результаты поиска

Содержание DTR75

Отзывы:

Похожие инструкции для DTR75

Бренды по названию

Популярные бренды