Dynapac DTR75, Руководство по эксплуатации

Страница: 60 / 120

3. Turn the ignition key to position “I”.
ð
The warning buzzer sounds.
4.
NOTICE!
Components may get damaged!
– Starting attempts should not exceed 30
seconds uninterrupted or max. 3 times
for 10 seconds. Then allow the starter to
cool down to ambient temperature.
– If the engine has not started after these
attempts, determine the cause.
Turn the ignition key to position “II”.
ð
The starter cranks the engine.
5. As soon as the engine is running, turn the ignition key to
position “I”.
The starter switch is designed with a re-start
lock. The ignition key must first be turned
back to position “0” before a new starting
attempt can be made.
NOTICE!
Danger of engine damage!
– Warm up engine for a short while before
starting work. Do not operate the engine
immediately under full load.
B-ELE-0081
Fig. 44
B-ELE-0082
Fig. 45
Operation – Starting the engine
DTR75 60