Dynapac CS 141, Руководство по обслуживанию

Страница: 22 / 29

20
CS 141 M141EN4
Fig. 31 Fuel tank
1. Drain plug
Fuel tank
– Draining off water
Water can be drained via the drain plug at the bottom of
the tank. Draining should be done when the roller has
been standing still for some time, eg, overnight.
Unscrew the drain plug (1) and allow water and sedi-
ment to drain off until only pure fuel runs out.
Tighten the drain plug. If the tank is emptied completely
then the fuel system must be vented. See Cummins
service manual.
1
EVERY 1000 HOURS OF OPERATION (Every six months)
Fig. 32 Hydraulic reservoir
1. Oil drain plug
1
Hydraulic reservoir
– Draining
Drain condense water from the hydraulic reservoir via
the drain plug (1).
Drain after the roller has stood still for a longer period,
eg, overnight. Drain as follows:
Hold a can underneath the drain plug (1).
Loosen the plug and allow any water to run out.
Tighten the plug.