Dynapac CS 141, Руководство по обслуживанию

Страница: 16 / 29

14
CS 141 M141EN4
Fig. 18 Lubricant nipple
1. Lubricant nipple, steering
cylinder
Fig. 17 Lubricant nipples
1. Lubricant nipples, articulation
2. Lubricant nipples, steering
cylinders
Articulation steering and
steering cylinder bushings
– Lubrication
1
1
2 1
EVERY 50 HOURS OF OPERATION (Weekly)
Nobody must be allowed near the steering
joint when the engine is running. Danger of
being crushed when steering is operated.
Push the reserve/parking brake knob befo-
re lubricating.
Turn the steering wheel fully to the left to gain access
to all seven grease nipples (1 and 2) from the right side
of the machine.
Wipe the grease nipples. Lubricate the articulation
nipples (1) with five strokes of the hand grease gun,
and the steering cylinder bearings (2) with three
strokes in each bearing. Make sure that grease
penetrates the bearings. If grease does not penetrate
the bearings, it may be necessary to relieve the
articulation joint with a jack while repeating the greasing
process.
Turn the machine back for driving straight ahead. This
makes the rear bearing (1) of the left steering cylinder
accessible from the left side of the machine.
Wipe the nipple and grease with three strokes of the
hand grease gun.
2 1
WARNING