Dynapac CP142, Руководство по обслуживанию

Страница: 10 / 29

8
CP142 M142EN1
The periodic measures are intended to be performed
primarily with the specified hours of operation,
secondarily for the periods: daily, weekly, etc.
Remove all dirt before filling, when checking
oils and fuel, and when lubricating with oil or
grease.
The manufacturer’s instructions noted in the
engine manual also apply.
MAINTENANCE MEASURES
Items Action See page Comments
in fig. 1
Before starting each day
14 Check level in hydraulic reservoir 9
2, 27 Check that cooling air is unrestricted 9
19 Refuel 9
2 Check diesel engine coolant level 10 See engine manual
10 Check diesel engine oil level 10 See engine manual
3 Check setting of scrapers 11
17, 18 Check sprinkler system 11,12,13
26 Fill the water tank 13
Test the brakes 13
Every 10 hours of operation (Daily)
Items Action See page Comments
in fig. 1
9 Clean the air cleaner filter element and
ensure that hoses an connections are tight
14
4 Check the tire pressure 15
6 Check the wheel nut torque 15
5 Check the ballast bolt torque 15
21, 22 Lubricate the steering cylinder, steering bearing
and oscillation shafts
16
After the first 50 hours of operation change all the oil filters and
lubricating oils, but not the hydraulic fluid.
Every 50 hours of operation (Weekly)