Dynapac CA3500DCP, Инструкция по эксплуатации, Страница: 149 / 178

Maintenance measures - 500 h
4812165301.pdf 2022-09-02
Diesel engine - Oil and Filter change
Fig. Tractor frame
1. Cover plug
1
The oil drain plug is mounted with a hose on the
engine. It is accessible on the left-hand, rear
underside of the tractor frame and is mounted inside a
cover plug (1).
The rear hose is for the oil drainage, the front one for
the radiator water.
Drain the oil when the engine is warm. Place a
receptacle that holds 19 liters (5 gal) under the drain
plug.
Replace the engine oil filter (2) at the same time. Refer
to the engine manual.
3
Fig. Engine compartment
2. Oil filter
3. Dipstick
2
Take great care when draining warm fluid and oil.
Wear protective gloves and goggles. Take great care when draining warm fluid and oil.
Wear protective gloves and goggles.
Hand in the drained oil and filter to an
environment-friendly waste disposal station. Hand in the drained oil and filter to an
environment-friendly waste disposal station.
Hood, hinges - Lubrication
Fig. Hood
1. Hinge
1
Lubricate engine hood hinges (1) and the slide rails of
the operator's seat with grease, other joints and
controls with oil. Lubricate the cab hinges with grease.
See the lubrication specification.
137