Dynapac CA3500DCP Скачать руководство пользователя страница 111

Страница: 111 / 178

Operating instructions - Summary

4812165301.pdf

2022-09-02

Operating instructions - Summary

Follow the SAFETY INSTRUCTIONS specified in the Safety Manual.

Ensure that all instructions in the MAINTENANCE section are followed and the
steering hitch lock is unlocked.

Turn the master switch to the ON position.

Move the forward/reverse lever to the NEUTRAL position. Sit down in the seat.

Activate the parking brake.

Disengage the emergency stop.

Set the engine speed switch to idle (LO).

Start the engine and allow it to warm up.

Set the engine speed switch to Mid/working mode.

10.

Deactivate the parking brake.

10.

Deactivate the parking brake.

11. Drive the roller. Operate the F/R lever with care.

12. Test the brakes. Remember that the braking distance will be longer if the

hydraulic fluid is cold.

12. Test the brakes. Remember that the braking distance will be longer if the

hydraulic fluid is cold.

13.

Set the transportation/working mode button in position working mode.

13.

Set the transportation/working mode button in position working mode.

14.

Use vibration only when the roller is in motion.

14.

Use vibration only when the roller is in motion.

15. IN AN EMERGENCY:

- Press the EMERGENCY STOP.
- Hold the steering wheel firmly.
- Brace yourself for a sudden stop.

15. IN AN EMERGENCY:

- Press the EMERGENCY STOP.
- Hold the steering wheel firmly.
- Brace yourself for a sudden stop.

16.

When parking:
- Activate the parking brake.
- Switch off the engine and block the drum and wheels if the roller is on an inclined
surface.

16.

When parking:
- Activate the parking brake.
- Switch off the engine and block the drum and wheels if the roller is on an inclined
surface.

17.

When lifting: - Refer to the relevant section in the Instruction Manual.

17.

When lifting: - Refer to the relevant section in the Instruction Manual.

18.

When towing: - Refer to the relevant section in the Instruction Manual.

18.

When towing: - Refer to the relevant section in the Instruction Manual.

19.

When transporting: - Refer to the relevant section in the Instruction Manual.

19.

When transporting: - Refer to the relevant section in the Instruction Manual.

20.

When recovering - Refer to the relevant section in the Instruction Manual.

20.

When recovering - Refer to the relevant section in the Instruction Manual.

Содержание CA3500DCP



















































































































































































Результаты поиска

Содержание CA3500DCP

Отзывы:

Dynapac CA3500DCP, Инструкция по эксплуатации, Страница: 111 / 178

Результаты поиска

Содержание CA3500DCP

Отзывы: