Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual
Note:
Note:
User can also define IP address here in P2P mode, once
user press “#”, Gateway will call out this IP address.
“refixsw”, “prefixdisab”, “usrdefprefix” commands must work together.
-codec set who is the one to determine voice codec during negotiation. 0
is caller will determine the codec, and 1 is mater will determine the
codec. (During negotiation 2 endpoints will compare gateway type
level to determine who is master.)
-localrbt Enable/Disable
locally
generate ring back tone. “0” means
gateway will receive ring back tone from remote callee, “1”
means gateway will generate ring back tone locally.
-gwprefix
drop or keep gateway prefix . “0” means when gateway has
incoming call from IP side, it will not drop prefix before
searching for callee number. “1” means when gateway has
incoming call from IP side, it will drop prefix before searching
for called number.
Note:
1. If user wants to implement one-stage dialing in FXO Line,
this function must be enabled, and user has to dial prefix
number (instead of Line number of FXO Line)+ PSTN
number to make a call to PSTN side connected with FXO
Line.
2. After gateway-prefix-drop function is enabled, user must
remember to re-configure line number of FXS Line,
because line number of FXS Line must remove prefix
number. For example, origin line number of FXS line is
1001, prefix is 100, since prefix number will be drop, once
gateway has incoming call 1001, after drop gateway prefix
100, it will search line number “1”. So line number must be
set as “1”.
-hwtype application rom file of 37 series are the same no matter how many
ports is the module, so after user downloads the application rom
83
