Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual
Note:
1. This is for Dynamix DW-0202/H, for Dynamix DW-0101/H model, there
are only line1 and line2 command.
2. Line1~Line4 number must follow the prefix number if device is
configured as
Gateway Type
. For example, if prefix number is 999,
then the line1 & line2’s number are 9991 & 9992.
3. If Gateway is configured as
Terminal Type
, each line will register to GK
with it’s own number, prefix number is not needed.
4. No matter in GK or P2P mode, user only needs to dial line number to
reach local port.
For example, in P2P mode, user wants to dial from
FXS TEL1 to FXO Line1, only need to dial number of line2.
-alias
H.323 ID. If in gatekeeper mode, this h.323 ID must be different
from others who are registering to the same gatekeeper.
-display An addition name for special application if callee needs this r to
recognize in called site.
-gkdis
set auto discovery function on or off. If this function is enabled and
IP address of GateKeeper is set as 255.255.255.255, LAN Phone
will multicast to search a GateKeeper on network with configured
GateKeeper name (please refer to -gkid); if IP address of
GateKeeper is set, before LAN Phone register to the assigned
GateKeeper, it will send out GRQ(GateKeeper Request) message
with configured GateKeeper name to GateKeeper first.
-gkid
set GateKeeper name for GateKeeper discovery. When Gateway
send out GateKeeper discovery message will search GateKeeper
with this GateKeeper name. (please refer to -gkdis)
-rtp
to allocate RTP port range—NOT RECOMMENDED. This may be
used when RTP port range conflicts with Firewall policy. (each port
of Gateway use 2 RTP ports)
-ttl
to set timer for TTL(Time To Live). Gateway would send RRQ, with
keepAlive, to gatekeeper periodically according to TTL timer.
-gkfind gatekeeper finding port. Port number, which Gateway uses it to
87
