Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual
-------------------------------------------------------------------------------
usr/config$ line –config 1 forward 1002
-------------------------------------------------------------------------------
In this example means: if user calls in FXS Line and hasn’t
been answered in forward time (please refer to
[sysconf
-forwardtime
] command), gateway will automatically forward
this call to phone number “1002”.
(2) P2P Mode Usage:
-------------------------------------------------------------------------------
usr/config$ line –config 1 forward 1002
-------------------------------------------------------------------------------
In this example means: if user calls in FXS Line1 when Line1
is busy, gateway will automatically forward this call to IP
address of “1002” in Phone book.
4.2.13 [route]
This command is to set routing table for Gateway.
----------------------------------------------------------------------------------------------
us
r/
config$ route
Routing table information and configuration
Usage:
route -add [prefix number][dst number][e164 number]
[min number][max number][hunt number]
route -delete index
route -modify index [prefix number][dst number][e164 number]
[min number][max number][hunt number]
route -ip [dst number][e164 number]
route -fxs [dst number][e164 number]
route -fxo [dst number][e164 number]
route -print
Routing table information.
prefix The prefix of dialed number.
dst Destination
port(FXS:0/FXO:1/IP:2).
e164
Destination e164 number(when destination is FXS or
91
