ALARM MESSAGE (1)
This function allows user to program alarms with the
keyboard controller.
Set the alarm preset:
Save Alarm - The message is appeared on the monitor
when it is memorized a related preset number on an
activated sensor. It is appeared by means of that is a
directly programmed by the keyboard without use OSD
menu. How to program the alarm set, refer to the
keyboard
'
s manual.
Scan Alarm - With the keyboard, select to alarm on of
the related camera and it appears a message in a
watching with alarm on.
Scan End - With the keyboard, select to alarm off, it
appears a message in a watching is end with alarms. But
camera is continuously watching by itself, therefore if
user wants to stop the camera watching, select to OFF
all alarm channels in OSD menu.
ALARM MESSAGE (2)
This message is appeared when the alarm is activated with
related preset.
Alarm CH1 - In normal activity, it appears a channel
number that is assigned in setting.
Relay ON - In selecting ON to alarm relay of the related
camera with the keyboard.
Relay OFF - In selecting OFF to alarm relay of the
related camera with the keyboard.
The alarm relay is on any alarm channel which one is
activated in the four alarm channels. After approx 1 minute, it
will turn OFF automatically and it can be turned OFF to push
CLR
key on the keyboard.
22. ALARM PRESET SET PAGE
ALARM CH PRESET NO.
This function allows user to program alarms with preset
positions.
For 4-input alarms, each alarm channel can be
programmed one preset in no.1 to no. 128 preset positions.
Set the alarm preset:
Use the joystick up or down to position the cursor
beside each channel.
Move the joystick left or right on the parameter.
Select preset number one preset in 001 to 128 as
desire.
HOME POSITION PRESET
Home position preset allows user to program one of 128-
presets with home position. With home position time, it
allows the camera to go back to home position by force
after priority on any position or any sequence.
Set the home position:
Use the joystick up or down to position the cursor
beside Home Position Time.
Move the joystick left or right the cursor on the
parameter.
Select time from 001 second to 180 seconds as desire.
The default is OFF and if the value is OFF, this
function disables.
HOME POSITION TIME
It allows the dome to revert to home position after any
location by force.
Select the home position priority:
Use the joystick to position the cursor beside
RESUME TIME SET.
Move the joystick left or right to set to:
OFF (default), 001 second to 180 seconds.
ALARM PRESET SET
- Alarm CH1 Preset No : 001
- Alarm CH2 Preset No : 001
- Alarm CH3 Preset No : 001
- Alarm CH3 Preset No : 001
- Home Position Preset : 001
- Home Position Preset : OFF
- PREV MENU PAGE
<< CAMERA SETUP p3 >>
17. Select Alarm
: Sensor
18. Motion on/off
: Off
19. Motion Detection Set :
20. PRIVACY ZONE SET :
21. ALARM CH ON/OFF PAGE
22. ALARM PRESET SET PAGE
23. FACTORY RESET WARNING!
- PREV MENU PAGE
ALARM PRESET SET
- Alarm CH1 Preset No : 001
- Alarm CH2 Preset No : 001
- Alarm CH3 Preset No : 001
- Alarm CH3 Preset No : 001
- Home Position Preset : 001
- Home Position Preset : OFF
- PREV MENU PAGE
CAM-001
Save Alarm
CAM-001
SCAN Alarm
CAM-001
SCAN END
CAM-001
Alarm CH1, PST01
CAM-001
Relay ON
CAM-001
Relay OFF