Dynamic DX-REMG91, Руководство по установке

Страница: 48 / 80

GBK63648
:
Issue 3
– February 2012
42
5.3 G91 Connection with the DX System
The G91 has a single DXBUS connector that enables a suitable length DXBUS cable to
be used to interconnect to the remainder of the DX system.
DXBUS cables are available in a variety of lengths.
Warning:
Care should be taken if DXBUS cables are disconnected.
Any protruding screws should be either plastic or plastic coated to
prevent short circuits occurring with the DXBUS cable pins.
Warning:
The cables must be adequately routed and secured to prevent
cutting, crushing, chaffing or other physical damage or abuse. This
includes the prevention of the cables being caught or snagged on
external objects. The wheelchair user maintenance schedule and
service instructions should include appropriate inspection and
maintenance requirements for connectors, cables and wiring.
Note:
The DX-REMG91 does not support certain modules such as DX-PCMR
or DX-IRIS. In addition, the DX-REMG91S is not recommended for use
with the DX-RJM-5SW; DX-RJM-SNP and DX-SLM. Should any
clarification be required, please contact Dynamic Controls.